
Chainsaw Spirals – FineWoodworking
Eight years in the past, a logging truck pulled as much as Howard Werner’s studio outdoors Phoenix with a supply. The truck crane lifted the trunk of a 7-foot diameter truck. poplar and nimbly positioned it on the coated concrete slab the place Werner carves his furnishings and sculpture with a chainsaw. The dimensions on the crane learn “15,000 lbs”. Werner used his greatest noticed to chop two 3-foot-square items. items of the trunk to those tables and sawing their prime and backside faces flat and parallel. After refining these surfaces with an electrical planer, he traced the spirals with chalk and pencil – a big spiral on the prime and a smaller one on the backside. Then, blanks apart, he carved the channels in a spiral, plunging into the highest and backside faces. When the tough carving was full, he set the tables apart to dry – for six years – earlier than adjusting their shapes and refining their textures, compensating for warping and leaving clear, clear noticed marks on the vertical surfaces. The highest, in distinction, he flattened and hand-sanded to an virtually good degree and high quality polish. Then one other truck arrived and took the tables to the Mesa Museum of Contemporary Artthe place they are going to be on show in an exhibition of their work till March nineteenth.
![]() |
Pictures: John Dowd.
In High quality Carpentry #302
![]() |
chainsaw furnishings |
![]() |
The best way to add energy and elegance to any slab |
![]() |
ash and ice |
Join eletters immediately and get the most recent methods and directions from High quality Woodworking, plus particular affords.
#Chainsaw #Spirals #FineWoodworking